公司设备简介：
激光切割机SLCF-XL30×90
1、最大切割范围：3000mm×9000mm
2、切割精度：±0.1mm
3、切割特点：功率大、切割范围广、切缝窄、垂直度好、断面光洁、 精度高、速度快、热变形小。
4、切割种类：碳钢、不锈钢、铝、铜等金属材料；
5、木材、塑料、有机玻璃、层压板等非金属材料。
数控精细等离子切割机
- 最大切割范围：3000mm×12000mm
- 切割精度:±1.0mm
- 切割特点：功能全面，可同时对板材进行快速的切割、划线、雕刻和点标记加工处理，可编程切割出任意几何形状；切割厚度范围广，等离子切割1~30mm,， 火焰切割30~200mm；切割速度快，切割成本较低。
- 主要切割金属材料：碳钢板、不锈钢板等。
数控水刀切割机
1、最大切割范围：1500mm×4000mm
2、切割精度:±0.5mm
3、切割特点：切割范围广，适用切割各种材料；切割不变形；切割成本低。
4、切割厚度：0.5mm—40mm。
W11S上锟式万能卷板机
1、加工范围：板厚0.5-20mm ； 最大加工长度4米；卷圆直径：500mm-6000mm。
2、加工精度： 圆度±1mm。
3、加工特点：数控调节，保持加工件两端一致。
金属表面处理：
- 板材拉丝：对不锈钢板，铜板，铝板进行表面拉丝处理
加工板厚：0.3-5mm（手动拉丝可任意板厚）
- 管材拉丝：对各种材质金属管材进行表面拉丝处理
加工长度：1000mm—9000mm
3、喷砂：对各种金属表面进行喷砂处理镀。
数控冲床（63吨）
1、加工范围：板厚 0.5mm—6.0mm；1500mm×3000mm
2、加工特点：数控调节，加工精度高。
Company equipment Introduction:
Laser cutting machine SLCF-XL30 × 90
1, the biggest cut of: 3000 mm × 9000mm
2, cutting accuracy: ± 0.1mm
3, cutting features: power, cutting a wide range of narrow kerf, the verticality of good, clean profile, high precision, speed, heat distortion small.
4, cutting Category: carbon steel, stainless steel, aluminum, copper and other metal materials;
Wood, plastic, plexiglass, laminates, and other non-metallic materials.
Fine CNC plasma cutting machine
1, the biggest cut of: 3000 mm × 12000mm
2, cutting accuracy: ± 1.0mm
3, cutting features: full-featured, both on the plate for rapid cutting, crossed, sculpture and tag processing, programmable cutting out arbitrary geometry; cutting thickness of a wide range of plasma cutting 1 ~ 30 mm,, flame cutting 30 ~ 200mm; cutting speed and cutting costs are lower.
4, the main cutting metal materials: carbon steel plates, stainless steel plate, and so on.
NC water knife cutting machine
1, the biggest cut of: 1500 mm × 4000mm
2, cutting accuracy: ± 0.5mm
3, cutting characteristics: cutting a wide range of application of cutting various materials; cutting not deformation; cutting costs low.
4, cutting thickness: 0.5 mm-40mm.
W11S on Kun-omnipotent Bending Machine
1, processing: thickness 0.5-20 mm; processing length of the largest four meters; Volume circle diameter: 500 mm-6000mm.
2, processing accuracy: roundness ± 1mm.
3, processing features: CNC in order to maintain processing at both ends of the same.
Metal surface treatment:
1, Plate Drawing: The stainless steel plates, copper, aluminium surface drawing processing
Processing thickness :0.3-5 mm (manual drawing can be arbitrary thickness)
2, pipe Drawing: metal pipes of various materials to deal with the surface Drawing
Work length: 1000 mm-9000mm
3, sandblasting: the metal surface treatment sandblasting plating.
NC Punch (63 tons)
1, processing: thickness 0.5 mm-6.0mm; 1500mm × 3000mm
2, processing characteristics: NC-conditioning, high-precision machining.
|
